Gas Logs for Fireplaces: Vented vs Vent-Free, Costs, Codes
Vented or vent-free gas logs? What each does to heat and indoor air, the code limits, burner sizing from a maker's table, Oct 2026 prices and cost per hour.
A gas log set is the cheapest way to get a flame in a wood fireplace with a key or a remote. It is a different product from a sealed gas insert, and the choice between vented and vent-free logs decides what you get: a decorative fire with most of its heat going up the chimney, or a heater that keeps everything it burns in your room. Here is that trade-off with the code text, sizing, 2026 prices and running costs.
What are gas logs?
Gas logs are a gas burner topped with refractory ceramic logs, installed in the firebox of an existing wood-burning fireplace with no glass front. They light with a match, a standing pilot or electronic ignition, and burn natural gas or propane.
They are not a gas fireplace insert. An insert is a sealed firebox behind glass with a blower, built to heat a room; our gas fireplace inserts guide covers that product. A log set leaves the fireplace open and keeps its look. If you are still choosing between gas, wood, pellet and electric, start with the fireplace inserts guide.
Vented or vent-free gas logs: what is the difference?
Vented logs send their exhaust up the chimney with the damper fixed open; vent-free logs burn cleaner by design and release their exhaust into the room. That one difference drives heat, indoor air, flame look and code status.
| Vented gas logs | Vent-free (ventless) gas logs | |
|---|---|---|
| Listing standard | ANSI Z21.60, decorative appliance for solid-fuel fireplaces | ANSI Z21.11.2, unvented room heater |
| Damper | Fixed open, permanently | Per the set’s manual |
| Where the exhaust goes | Up the chimney | Into the room |
| Flame | Tall, yellow, wood-like | Smaller, bluer, tuned for clean combustion |
| Heat into the room | Low | High |
| Size limit in code | None specific; set by the fireplace | 40,000 BTU per hour maximum |
| Bedrooms and bathrooms | Allowed if the room meets volume rules | Not allowed, apart from small wall-mounted heaters |
| 24 in complete set, Oct 2026 | $668 to $2,028 | $704 to $1,540 |
The code text is in the International Residential Code, sections G2432 and G2445 in the 2021 edition, which mirror sections 602 and 621 of the International Fuel Gas Code.
Why do vented gas logs give so little heat?
Because the code classes them as decorative appliances, and they only work with the chimney open. The Real Fyre G45 burner manual, as one example, says the damper must be fully open when the unit burns and supplies a damper clamp that must be permanently installed so the damper can never fully close. It lists a minimum permanent opening: 55 square inches for a 24 inch burner in a masonry fireplace with a 15 foot chimney.
So a vented set heats the room mostly by radiation from the flame, while hot exhaust and warm room air leave through the flue. The clamped damper also means the fireplace leaks room air when the logs are off. That is the honest trade: vented logs are about the look of a fire, and a pair of fireplace glass doors cuts some of the off-time loss where the log set’s listing allows doors.
What does “99.9% efficient” leave out about vent-free logs?
It leaves out that everything the burner makes stays in the house. Vent-free makers advertise near 100% efficiency because no heat leaves through a flue. The same fact means the room receives all the water vapor, carbon dioxide and nitrogen dioxide the flame produces.
- Water vapor: by our stoichiometry, burning one therm of natural gas makes about 9 lb of water. A 37,000 BTU per hour vent-free burner on high adds about 3.4 lb, roughly two-fifths of a gallon, to the room every hour.
- Nitrogen dioxide: EPA names unvented combustion appliances as a primary indoor source of NO2, an irritant to the eyes, nose, throat and airways, and says venting to the outdoors is the most effective way to cut exposure.
- Oxygen: the code requires an oxygen depletion sensor that shuts off the gas before the room’s oxygen falls below 18%.
EPA’s Burn Wise program says it does not support unvented gas logs because of indoor air quality, and notes they are illegal to install in some jurisdictions.
What do codes allow for vent-free gas logs?
Where they are legal at all, the model code caps the burner at 40,000 BTU per hour and ties its size to the room. The rules in IRC G2445 (IFGC 621):
- Input no more than 40,000 BTU per hour.
- No more than 20 BTU per hour per cubic foot of the room, counting adjoining rooms joined by an opening that cannot be closed.
- An oxygen depletion sensor that cannot be field adjusted.
- Never the only source of comfort heat in a home.
- No unvented decorative room heater in a factory-built fireplace unless that fireplace is tested, listed and labeled for such use under UL 127.
Worked example: a 37,000 BTU burner needs at least 1,850 cubic feet. A 15 by 16 foot room with 8 foot ceilings is 1,920 cubic feet and just clears it; a 12 by 14 foot den with 8 foot ceilings, at 1,344, does not. California’s Health and Safety Code 19881 bars the sale of unvented heaters for use in a dwelling, apart from electric heaters and decorative logs for a vented fireplace, and allows natural gas unvented logs and fireplaces only under state-adopted standards with an approved listing, so check local rules before you shop.
What size gas log set fits your fireplace?
The burner size is set by your firebox, from the maker’s minimum fireplace table, and the BTU rating follows the size. Measure the front width, rear width, depth and height of the opening, then pick the largest burner whose minimums you meet. Real Fyre’s G45 vented burner table:
| G45 burner size | Min. front width | Min. rear width | Min. depth | Min. height | Natural gas input | Propane input |
|---|---|---|---|---|---|---|
| 16/19 in | 29 in | 22 in | 11 in | 17 in | 40,000 BTU/hr | 30,000 BTU/hr |
| 18/20 in | 30 in | 24 in | 13 in | 17 in | 70,000 BTU/hr | 45,000 BTU/hr |
| 24 in | 34 in | 28 in | 13 in | 17 in | 90,000 BTU/hr | 65,000 BTU/hr |
| 30 in | 40 in | 34 in | 16 in | 17 in | 95,000 BTU/hr | 75,000 BTU/hr |
| 36 in | 46 in | 40 in | 16 in | 17 in | 110,000 BTU/hr | 90,000 BTU/hr |
The same manual sets a minimum chimney height of 15 feet from hearth to top, and limits an ash lip to 3/4 inch. Vent-free burners run far smaller: Grand Canyon’s Vulcan vent-free system is listed at 19,000 to 37,000 BTU per hour, and Empire’s Loft vent-free burner tops out at 40,000.
Natural gas or propane gas logs?
Choose the set built for the gas you have; many cannot be converted later. The Real Fyre G45 manual says the burner is not field convertible between gases. Propane sets carry lower input ratings in the table above, and the manual requires the propane supply to be regulated outdoors and hard-piped into the fireplace, never run from a tank or rubber hose inside the house.
Natural gas is about half the cost per hour, as the next table shows. If your home has no gas service, the propane tank, regulator and line add to the job, which pushes some buyers toward an electric insert instead.
How much do gas logs cost in 2026?
HomeGuide puts a gas log set at $200 to $1,500 plus $100 to $500 for installation, or $300 to $2,000 installed (February 2026). Complete 24 inch sets with burners listed at Fireplaces Direct in October 2026:
| 24 in set (Fireplaces Direct, Oct 2026) | Type | Ignition | Price |
|---|---|---|---|
| Majestic Timberland Oak | Vented | Manual, natural gas | $668 |
| Majestic Timberland Oak | Vented | Safety pilot | $868 |
| Real Fyre Chestnut Oak (CN-24, GX45 burner) | Vented | Match lit, natural gas | $971.10 |
| Majestic Heritage Oak, 2-tier | Vented | Electronic, with remote | $2,028 |
| Hargrove Weathered Oak (HGVFWR) | Vent-free | Millivolt | $704 |
| Monessen Mountain Oak | Vent-free | Manual / millivolt | $858 / $1,058 |
| Grand Canyon Weathered Oak (Vulcan burner) | Vent-free | Millivolt with remote | $1,540 |
Add the gas line if none reaches the fireplace: HomeGuide lists $250 to $500 to extend an existing line and $15 to $50 or more per foot for a new run (February 2026).
What do gas logs cost to run per hour?
About $0.95 to $1.83 an hour for the vented G45 sizes below, and about $0.50 for a 37,000 BTU vent-free burner on natural gas. We multiplied each burner’s rated input by US residential fuel prices from EIA for January 2026, the same method our gas insert guide uses.
| Burner (rated input) | Fuel | Cost per hour on high |
|---|---|---|
| Real Fyre G45 18/20 in (70,000 BTU) | Natural gas, $1.35/therm | About $0.95 |
| Real Fyre G45 24 in (90,000 BTU) | Natural gas | About $1.22 |
| Real Fyre G45 18/20 in (45,000 BTU) | Propane, $2.57/gal | About $1.26 |
| Real Fyre G45 24 in (65,000 BTU) | Propane | About $1.83 |
| Vent-free, 37,000 BTU | Natural gas | About $0.50 |
| Vent-free, 37,000 BTU | Propane | About $1.04 |
The vented burner costs more per hour and delivers less of that heat to the room. Propane assumes 91,500 BTU per gallon.
What has to happen before gas logs go into a wood fireplace?
Clean and inspect the chimney, and stop burning wood in that fireplace for good. The G45 manual says the flue, damper and firebox must be cleaned of soot, creosote and ash and inspected by a qualified chimney cleaner first, and that solid fuel must not be burned where a decorative gas appliance is installed. Our chimney inspection guide explains what a Level 1 or Level 2 inspection covers.
Two more checks. Glass doors are allowed with this burner only if the opening with the doors open still meets the minimum fireplace size, and door frames taller than 3/4 inch need slots for air. Top-sealing damper caps are a poor match: one maker’s listing says they are not recommended with gas logs because a damper that fails to open could back carbon monoxide into the house; see our chimney caps guide.
Who should install gas logs?
A licensed gas fitter or plumber, or an NFI-certified hearth technician, under a permit. The gas line, shut-off valve, burner, pilot kit and damper clamp all follow the log set’s manual, NFPA 54 (the National Fuel Gas Code) and local code. This page gives no gas installation steps. Install a carbon monoxide alarm whichever type you choose.
Who should not buy gas logs?
Skip them if you want the fireplace to heat the house. Vented logs are decorative, and vent-free logs are capped in size, kept out of bedrooms and cannot be the only heat source. In these cases something else fits better:
- You want real heat from gas: a direct vent gas fireplace insert seals combustion behind glass.
- Anyone in the home has asthma, or the house runs damp: vented logs or a sealed insert keep exhaust out of the room.
- You live in California or another place that restricts unvented heaters: treat vent-free as unavailable until your building department says otherwise.
- You have no gas line and only want ambiance: an electric insert plugs into an outlet.
- You still want wood fires sometimes: a fireplace with gas logs installed should not burn wood.
Where do these numbers come from?
- Code text: International Fuel Gas Code 2021, sections 602 and 621, and International Residential Code 2021, sections G2406.2 (IFGC 303.3), G2432 and G2445, as adopted by Virginia, read November 6, 2026. Section G2453 (IFGC 634) is cited from the 2012 edition; those numbers differ in 2021. Adopted editions and local changes vary by state and town.
- Burner inputs, minimum fireplace sizes, damper and gas rules: Real Fyre G45 Series Burner Installation and Operating Instructions (L-A2-208, rev. 9), Robert H. Peterson Co.
- Prices: Fireplaces Direct product listings, October 2026; vent-free burner ratings from the Grand Canyon Weathered Oak and Empire (White Mountain Hearth) Loft listings there; top-sealing damper warning from the Lock-Top II listing at Northline Express, October 2026.
- Installed and gas line costs: HomeGuide, gas fireplace insert cost (February 9, 2026).
- Indoor air: EPA, Nitrogen Dioxide’s Impact on Indoor Air Quality and EPA Burn Wise, Choosing Wood-Burning Appliances.
- California rule: Health and Safety Code 19881, read November 6, 2026 in the Public.Law copy of the state code.
- Fuel prices: EIA residential natural gas and residential propane prices, January 2026. Water vapor is our calculation from methane combustion.
Frequently asked questions
Quick answers to what readers ask us most
Are vented or vent-free gas logs better?
Vented logs are better for indoor air and look more like a wood fire, but most of their heat goes up the open flue. Vent-free logs put far more heat into the room because nothing leaves through a chimney, which is also why the code caps their size, requires an oxygen depletion sensor and keeps them out of bedrooms and bathrooms. If you want real heat with sealed combustion, a direct vent gas insert does both jobs.
Do vented gas logs need the damper open?
Yes, permanently. The Real Fyre G45 burner manual, for example, requires the damper to be fully open when burning and includes a damper clamp that must be permanently installed so the damper can never fully close. The manual lists the minimum permanent opening by chimney height and burner size.
Are vent-free gas logs legal?
It depends on where you live. California Health and Safety Code 19881 bars the sale of unvented heaters for use in a dwelling, apart from electric heaters and decorative logs for a vented fireplace, and allows natural gas unvented logs and fireplaces only under state-adopted standards with an approved listing. Some other jurisdictions restrict them too. Where they are allowed, the model fuel gas code caps them at 40,000 BTU per hour, requires an oxygen depletion sensor and limits them to 20 BTU per hour per cubic foot of room volume. Ask your building department before you buy.
How much do gas logs cost?
HomeGuide puts a gas log set at $200 to $1,500 and installation at $100 to $500, for $300 to $2,000 installed (February 2026). Complete 24 inch sets we priced at Fireplaces Direct in October 2026 ran from $668 to $2,028 vented and $704 to $1,540 vent-free, before any gas line work.
How much does it cost to run gas logs per hour?
A 24 inch Real Fyre G45 vented burner rated 90,000 BTU per hour on natural gas costs about $1.22 an hour at $1.35 a therm; the 65,000 BTU propane version costs about $1.83 at $2.57 a gallon. A 37,000 BTU vent-free burner costs about $0.50 an hour on natural gas. Prices are EIA US residential averages for January 2026.