Cord of Firewood: Sizes, Face Cords, Ricks, and Prices
A cord of firewood is 128 cubic feet stacked. What face cords, ricks and half cords hold, how to measure a delivery, and 2026 prices per full-cord equivalent.
Firewood is one of the few things still sold by a unit most buyers cannot picture. “A cord”, “a face cord”, “a rick” and “a truckload” can describe very different amounts of wood at the same price. This page pins down each unit, shows how to measure what is dropped in your driveway, and converts every price to the same yardstick so you can tell a fair deal from a short one.
How big is a cord of firewood?
A cord is 128 cubic feet of wood, stacked tightly. The usual shape is 4 ft high, 4 ft deep and 8 ft long, which is about 3.62 cubic meters. NIST Handbook 130, the model weights-and-measures regulation most states draw on, defines a cord as “128 ft3 when the wood is ranked and well stowed”, meaning pieces placed in rows, touching, parallel and stacked compactly.
A cord is not 128 cubic feet of solid wood. The gaps between round and split pieces take up a large share. University of Maryland Extension’s “Heating with Wood” fact sheet (FS-926) works from about 80 cubic feet of solid wood in a standard cord.
What is a face cord, a rick, or a half cord?
A face cord is one row of wood 4 ft high and 8 ft long, as deep as one piece is long. Rick is the regional name for the same thing. A half cord is exactly 64 cubic feet in any shape. Because face cords depend on piece length, their real size varies:
| Piece length | Face cord or rick volume | Share of a full cord |
|---|---|---|
| 12 in | 32 cu ft | 1/4 |
| 16 in | about 42.7 cu ft | 1/3 |
| 18 in | 48 cu ft | 3/8 |
| 24 in | 64 cu ft | 1/2 |
HomeGuide notes most firewood is cut 14 to 18 inches long, so a face cord is usually about a third of a cord. Always ask the piece length before you compare a face-cord price to a cord price.
Can a seller legally sell a “face cord” or a “truckload”?
In states that follow NIST Handbook 130 for this rule, no. The 2026 edition says fireplace and stove wood shall be sold “only by measure”, using the cord and fractions of a cord or the cubic meter. It then prohibits the terms “face cord”, “rack”, “pile” and “truckload”, and “terms of similar import”, when advertising or selling firewood.
The same rule requires a delivery ticket or invoice showing the seller’s and buyer’s names and addresses, the delivery date, the quantity delivered, the price and the wood’s identity, such as the species. States adopt Handbook 130 in whole or in part, so check your state’s weights and measures office if a seller will only quote in face cords or truckloads. Rick is not named in the rule, but it describes the same one-row idea.
How much does firewood cost in 2026?
Here are HomeGuide’s 2026 prices for split wood with local delivery, converted to what each would cost per full cord. Smaller loads cost noticeably more per unit of wood.
| Amount | Volume | Typical price (2026) | Price per full-cord equivalent |
|---|---|---|---|
| Full cord | 128 cu ft | $275-$400 | $275-$400 |
| Half cord | 64 cu ft | $180-$280 | $360-$560 |
| Face cord (16 in pieces) | about 42.7 cu ft | $120-$200 | $360-$600 |
| Quarter cord | 32 cu ft | $100-$180 | $400-$720 |
| Bundle | up to about 1 cu ft | $5-$10 | $640-$1,280 |
HomeGuide also lists softwood at $175 to $275 a cord, green (unseasoned) wood at $150 to $275, and stacking at $20 to $80 a cord. The Maine Department of Energy Resources survey averaged $355 a cord on September 28, 2026, for seasoned wood with a two-cord minimum, delivered.
Is a cord of oak worth more than a cord of pine?
Yes, because a cord is a volume and heat comes from weight. Dense hardwoods pack more pounds of wood into the same 128 cubic feet. Using University of Maryland Extension figures (FS-926) at 20% moisture, and Maine’s $355 cord price burned in a 70% efficient stove:
| Species | Air-dried lb per cord | Million BTU per cord | Cost of delivered heat at $355 a cord |
|---|---|---|---|
| Red oak | 3,609 | 25.3 | about $20 per million BTU |
| Sugar maple | 3,577 | 25.0 | about $20 per million BTU |
| Ash | 3,370 | 23.6 | about $21 per million BTU |
| Shortleaf pine | 2,713 | 19.0 | about $27 per million BTU |
| Cottonwood | 2,304 | 16.1 | about $32 per million BTU |
To match red oak at $355, a cord of cottonwood would need to cost about $226. The calculator page has the full 18-species table and compares wood with pellets, propane, gas, oil and electricity at your prices.
How do you measure a firewood delivery?
Stack it tightly, measure it in feet, multiply, and divide by 128. Length times height times piece length gives cubic feet. Two quick examples with 16 inch pieces (1.33 ft):
- A stack 16 ft long and 4 ft high: 16 x 4 x 1.33 = about 85 cubic feet, or about two thirds of a cord.
- A “cord” that stacks to 14 ft long and 4 ft high: 14 x 4 x 1.33 = about 75 cubic feet, or about 0.58 of a cord.
Measure before the seller leaves if you can, or photograph the stack with a tape measure in frame. A loose pile thrown off a truck takes up more space than the same wood stacked, so never judge a delivery by the size of the heap.
Will a cord fit in a pickup truck?
Rarely in one trip. HomeGuide notes a small to mid-size pickup typically carries up to about a quarter cord. Weight is the bigger limit: a cord of air-dried red oak weighs about 3,600 lb, and green red oak about 5,000 lb (UMD FS-926). Most half-ton pickups are rated for less than that. Check the payload sticker on the driver’s door jamb before you haul your own.
How many cords do you need for a winter?
From under 1 to 6 or more, depending on how much of the house the stove heats, your insulation, climate, species and stove efficiency. Using our calculator’s heat-loss method with red oak at 70% efficiency:
| Home | Climate | Share of heat from the stove | Cords per winter |
|---|---|---|---|
| 2,000 sq ft, average insulation | Chicago-like | 100% | about 6 |
| 1,500 sq ft, average insulation | Chicago-like | 50% | about 2.2 |
| 1,000 sq ft, tight | Baltimore-like | 50% | about 0.8 |
Run your own house through the size and fuel calculator. If you are still choosing between wood and pellets, the pellet stove vs wood stove comparison weighs the labor against the savings, and the pellets guide covers the other fuel.
What should you ask before buying firewood?
Ask five questions, and get the answers on the invoice:
- How much, in cords or cubic feet? Not face cords, ricks or truckloads.
- What piece length? It sets the size of a face cord and must fit your firebox.
- What species? Mixed loads are common; Handbook 130 lets sellers state the mix within 10%.
- How dry is it, and how do you know? Ask for a moisture-meter reading under 20% on a freshly split face. Our seasoned firewood guide explains the test.
- Is delivery and stacking included? HomeGuide lists stacking at $20 to $80 a cord.
Buy wood cut close to home. The Don’t Move Firewood campaign, managed by The Nature Conservancy, says 50 miles is too far to move firewood and 10 miles or less is best, because tree-killing insects travel in it. Many states have quarantines that set hard limits.
Who is this page not for?
This page covers buying and measuring cordwood for a stove or fireplace. It does not cover drying wood you cut yourself, which is in the seasoned firewood guide, or pellet fuel, which is in the pellets guide. If you are still deciding whether wood heat suits you, start with the wood stove buying guide. If you cannot store at least one winter of wood under cover, buying by the cord will be frustrating.
Where do these numbers come from?
The cord definition, method-of-sale rule, prohibited terms and delivery-ticket rule are quoted from NIST Handbook 130 (2026 edition), Section IV.B, 2.4. Prices come from HomeGuide’s cord of firewood cost guide (January 2026) and the Maine Department of Energy Resources heating fuel survey (September 28, 2026). Cord weights and heat values come from University of Maryland Extension FS-926, Table 1. The local-firewood guidance comes from Don’t Move Firewood. Cords per winter are our estimates using the calculator’s method.
Frequently asked questions
Quick answers to what readers ask us most
How much is a cord of firewood in 2026?
HomeGuide's 2026 cost guide puts split, seasoned hardwood at $275 to $400 a cord with local delivery, with oak, hickory and other premium hardwoods at $400 to $600 or more near winter. The Maine Department of Energy Resources survey averaged $355 a cord delivered (two-cord minimum) on September 28, 2026. Local prices can easily differ by a factor of two.
How many face cords are in a cord?
It depends on log length. A face cord is one 4 by 8 ft row, as deep as one log. With 16 inch logs, three face cords make a cord. With 12 inch logs it takes four, and with 24 inch logs two.
Is a rick of wood the same as a face cord?
In most places, yes. Rick is a regional name for a single 4 by 8 ft row, the same thing many sellers call a face cord. Because its volume depends on log length, ask for the length of the pieces and the stack dimensions before you agree on a price.
How much does a cord of wood weigh?
Roughly 2,000 to 4,400 lb when air-dried, depending on species. University of Maryland Extension figures put a cord of air-dried red oak at about 3,600 lb and cottonwood at about 2,300 lb. Green wood weighs more, about 5,000 lb for red oak. That is why a cord rarely fits a pickup's payload in one trip.
How long does a cord of firewood last?
It depends on how much of the house it heats, your climate, the species and your stove. By our heat-loss method, a stove supplying all the heat for a 2,000 sq ft average home in a Chicago-like climate burns about 6 cords of red oak a winter; supplying half the heat for a 1,500 sq ft home, about 2.2. The calculator runs your numbers.