Wood Pellets for Pellet Stoves: Grades, Brands, and Cost
Choosing pellets for a pellet stove: PFI Premium ash, moisture and fines limits, the hardwood vs softwood myth, tons per winter, and 2026 cost per ton.
Pellet stoves are fussy eaters. The same stove can run clean for a week on one brand and choke its burn pot in two days on another. The difference is almost never hardwood vs softwood. It is ash, moisture and fines, and the industry grade printed on the bag tells you those limits. This page translates the grades into what you will see in the stove, then covers how much you need and what it costs.
What should you look for on a bag of pellets?
Look for the PFI Quality Mark, the grade, and a registration number. The Pellet Fuels Institute (PFI) Standards Program is a third-party accredited program: qualified plants are audited and their pellets lab-tested, and only they may print the Quality Mark. The mark carries a registration number (for example TP005) that you can match to PFI’s list of qualified production facilities.
The grade matters most. Premium is the grade pellet stoves are designed around. Federal rules go further: 40 CFR 60.532 says owners may burn only pellets named in the owner’s manual and graded under an EPA-approved program, and the manual must state that operating against it voids the warranty. Under the EPA’s 2015 wood heater rule, pellet stoves are certified using fuel from an EPA-authorized grading program, and the owner’s manual says which.
What do the PFI grades actually limit?
Each grade caps ash, moisture and fines, and sets durability and size ranges. Here is PFI’s Table 1 from its October 2022 standard specification, with the ash limit turned into pounds per ton so you can picture the burn pot:
| Property | PFI Premium | PFI Standard | PFI Utility |
|---|---|---|---|
| Inorganic ash (as received) | 1.0% or less (up to 20 lb per ton) | 2.0% or less (up to 40 lb per ton) | 6.0% or less (up to 120 lb per ton) |
| Moisture (as received) | 8.0% or less | 10.0% or less | 10.0% or less |
| Fines at the mill gate | 0.50% or less | 1.0% or less | 1.0% or less |
| Pellet durability index | 96.5 or more | 95.0 or more | 95.0 or more |
| Bulk density | 40-48 lb/cu ft | 38-48 lb/cu ft | 38-48 lb/cu ft |
| Diameter | 0.230-0.305 in | 0.230-0.305 in | 0.230-0.305 in |
| Heating value (as received) | 7,800 BTU/lb | Not set | Not set |
| Additives | 2.0% or less | 2.0% or less | 2.0% or less |
All three grades also cap chloride at 300 ppm and set limits for heavy metals. PFI’s list of qualified plants, checked October 6, 2026, showed only Premium-grade facilities, with no Standard-grade plants listed.
Why do ash, moisture and fines matter in the stove?
They decide how often you clean and how steadily the stove burns.
- Ash: a ton of Premium pellets leaves at most about 20 lb of mineral ash; Utility grade can leave six times that. Ash that does not fall through can fuse into clinkers in the burn pot, which choke the airflow.
- Moisture: water has to boil off before the wood burns. Wetter pellets burn cooler and smokier, and pellets that get damp swell and crumble.
- Fines: sawdust at the bottom of the bag. Fines feed unevenly through the auger, can smother the flame, and add to ash. The fines limit is measured at the mill; rough handling adds more, so a torn or crushed bag is worth a second look.
If your burn pot needs scraping far more often than your manual says, try a different brand or grade before assuming the stove is faulty. The pellet stove guide covers routine upkeep. Other causes of a dirty or failing burn are sorted by symptom in pellet stove problems.
Are hardwood pellets really hotter than softwood?
No. That belief comes from cordwood, where a cord of pine holds less heat than a cord of oak because pine weighs less per cord. Pellets are sold by weight and compressed to a similar density, so the per-cord gap disappears.
Per pound, dry wood of very different species carries nearly the same heat. Working from University of Maryland Extension’s figures (FS-926, Table 1) for air-dried wood:
| Species | Air-dried lb per cord | Million BTU per cord | BTU per lb |
|---|---|---|---|
| Red oak | 3,609 | 25.3 | about 7,010 |
| Shortleaf pine | 2,713 | 19.0 | about 7,000 |
| Cottonwood | 2,304 | 16.1 | about 6,990 |
The bag’s grade and ash content tell you far more than the words hardwood or softwood. Some stoves do run better on one or the other, so if yours does, trust your burn pot over the label.
Which pellet brands are PFI qualified?
PFI’s list of qualified production facilities, checked October 6, 2026, named these companies at Premium grade. Brand names on store shelves can differ from company names, so match the registration number on the bag.
| Company | Plant locations listed |
|---|---|
| Lignetics, Inc. | About 18 plants, including those making Energex, Marth, New England Wood Pellet, Bear Mountain, Dry Creek and PA Pellets (WV, VA, ID, OR, ME, PA, QC, WI, NH, NY, AZ, CA) |
| American Wood Fibers | Circleville, OH; Marion, VA |
| Curran Renewable Energy | Massena, NY |
| Somerset Pellet Fuel | Somerset, KY |
| Spearfish Pellet Co. | Spearfish, SD |
| Maine Woods Company | Athens, ME |
| Michigan Wood Fuels | Holland, MI |
| Pacific Coast Pellets | Shelton, WA |
| Snow Timber Pellets | Hurley, WI |
| Others | Appalachian Wood Pellet (WV), Al-Natural Energy (AL), Fiber By-Products (MI), Fiber Energy Products (MO), Georgia Biomass (GA), Indeck Ladysmith (WI), Staggemeyer Stave (MN) |
Store brands and private labels may carry PFI registration numbers issued for private labeling. PFI says to contact the selling company about quality questions on those bags.
How many tons of pellets does a winter take?
Between about 1 and 9 tons, depending on house size, insulation, climate and how much of the heat the stove supplies. These scenarios use our size and fuel calculator method with 16.4 million BTU per ton (the EIA heating fuel calculator value) and a 75% efficient stove:
| Home | Climate | Share from pellet stove | Tons per winter | 40 lb bags |
|---|---|---|---|---|
| 1,000 sq ft, tight | Baltimore-like | 50% | about 1.1 | about 56 |
| 1,500 sq ft, average | Chicago-like | 50% | about 3.2 | about 160 |
| 1,500 sq ft, average | Chicago-like | 100% | about 6.5 | about 320 |
| 2,000 sq ft, average | Chicago-like | 100% | about 8.6 | about 430 |
One ton takes up roughly 42 to 50 cubic feet at Premium bulk density, about one pallet. Make sure you have dry space for a winter’s worth before you order it.
How much does a ton of pellets cost in 2026?
The Maine Department of Energy Resources survey put wood pellets at $357 per ton on September 28, 2026, averaged across dealers. That price is for Maine-made pellets in 40 lb bags, local delivery included. It works out to about $7.14 per bag. Prices vary by region and season; buying a full pallet in spring or summer usually beats buying single bags in January.
What matters for comparing heat sources is the cost of heat delivered. At $357 a ton, 16.4 million BTU per ton and 75% efficiency, pellets deliver heat at about $29 per million BTU. The same survey priced seasoned cordwood at $355 a cord (two-cord minimum, delivered). Burned in a 70% efficient stove, a cord of red oak delivers heat at about $20 per million BTU, cheaper but with far more labor. The full trade-off is in pellet stove vs wood stove, and the calculator compares propane, gas, oil and electricity at your own prices.
How long does a 40 lb bag last?
Divide the bag’s heat by your stove’s burn rate. A 40 lb bag holds about 328,000 BTU at the EIA’s 16.4 million BTU per ton. A stove feeding about 2 lb an hour on low burns a bag in about 20 hours. On high, at about 5 lb an hour, the same bag lasts about 8 hours. Your manual lists the burn-rate range for each setting.
Hopper size sets how often you fill, not how much you burn. Many stoves take a full bag at once; see best pellet stoves for hopper capacities.
How should you store pellets?
Keep them dry, off the floor and in their bags until you use them. Pellets soak up moisture from damp air and from any contact with water, then swell and break down into sawdust that feeds badly. A garage or basement with a pallet under the bags works. Keep the stack away from the stove and any other heat source, as the stove manual directs.
Check the bags when they arrive. A damp, split or crushed bag is worth setting aside rather than pouring straight into the hopper.
Who should not rely on pellet heat?
Pellets are a poor fit if:
- Your power goes out often and you have no backup. Standard pellet stoves need electricity for the auger and fans.
- You have no dry storage for a ton or more. Pellets bought a few bags at a time cost more and may run short in a cold snap.
- Your area has no reliable pellet supply. Check local dealers before buying the stove, not after.
- You can get firewood cheaply and do not mind the work. Cordwood usually costs less per unit of heat. Our guide to buying a cord of firewood covers that side.
Where do these numbers come from?
The fuel and warranty rule is 40 CFR 60.532(e) and (g), read November 6, 2026 at Cornell LII. Grade limits come from the Pellet Fuels Institute Standard Specification for Residential/Commercial Densified Fuel (October 4, 2022, Table 1). The producer list comes from PFI’s qualified production facilities page, checked October 6, 2026. Heat per pound is computed from University of Maryland Extension FS-926, Table 1. The pellet heat content (16.4 million BTU per ton) is the EIA heating fuel calculator value. Prices come from the Maine Department of Energy Resources heating fuel survey of September 28, 2026. Winter tonnage is our own estimate using the method on the calculator page. We did not lab-test any pellets.
Frequently asked questions
Quick answers to what readers ask us most
How many bags of pellets are in a ton?
Fifty 40 lb bags make a ton (2,000 lb). Some sellers also sell 20 lb bags, 100 to the ton. At the Maine state survey's September 2026 average of $357 per ton delivered, that works out to about $7.14 per 40 lb bag.
Are hardwood pellets better than softwood pellets?
Not by type alone. Pellets are sold by weight, and dry wood of different species carries almost the same heat per pound. University of Maryland Extension figures put red oak, shortleaf pine and cottonwood all at about 7,000 BTU per pound when air-dried. Grade, ash and moisture tell you more than the word hardwood on the bag.
What does PFI Premium mean on a bag of pellets?
It means the pellets come from a plant qualified under the Pellet Fuels Institute Standards Program, with third-party audits and lab testing, and that they meet the Premium limits: ash 1% or less, moisture 8% or less, fines 0.5% or less at the mill gate, durability index 96.5 or higher, and a heating value of 7,800 BTU per pound as received. Look for the Quality Mark with a registration number.
How many tons of pellets do I need for winter?
It depends on how much of the house the stove heats and your climate. Using our heat-loss method, a stove supplying half the heat of a 1,500 sq ft average home in a Chicago-like climate burns about 3.2 tons; heating a tight 1,000 sq ft home halfway in a Baltimore-like climate takes about 1.1 tons. The calculator runs your own numbers.
Can I burn grill pellets in a pellet stove?
Check your stove's manual, which will name the fuel grade it was certified with. Under the EPA's 2015 wood heater rule, pellet stoves are tested with graded fuel and the manual and warranty say which. Heating pellets graded under the PFI program are the safe choice; flavored grill pellets are made for a different job.